Question: How Thick Should Plywood Be For Shelves?

How thick should Plywood be for garage shelves?

TIP: To optimize plywood use, plan your shelving to be 12″, 16″ or 24″ in width.

Then you can rip your plywood into either four 12″ wide strips, three 16″ wide strips or two 24″ wide strips with no waste..

Is MDF or plywood better for shelves?

When it comes to strength, plywood is the winner. MDF is a softer material than plywood and tends to sag or split under pressure. That’s why it’s important to reinforce it if you’re going to using it to build shelves or other weight-bearing furniture.

What type of plywood is strongest?

Marine plywoodIf you ever wondered “what is the strongest plywood?” The answer is Marine plywood. It is the strongest and toughest of all plywood on the market. It is bonded with high-quality glues to make the plies structurally solid and resistant to moisture.

What wood is best for making shelves?

The Best Wood to Use for Wood ShelvesPine. Pine is one of the most affordable and popular softwoods in the market. … Plywood. Plywood is another good option for people who are interested in making their own shelves. … Cherry. Although cherry is a hardwood, it is lightweight and easy to use. … Koa. … Red Oak. … Paduak. … Mahogany.

What thickness ply for shelves?

Use 18mm thick plywood as a minimum and have supports at no greater than 700mm apart for all but the lightest of loads.

How Far Can 3/4 plywood span?

24 inchesMaximum span 24 inches where 3/4-inch wood finish flooring is installed at right angles to joists.

What material is best for shelving?

When selecting shelf material, figure the cost, labor and quality before choosing.Economy Fir Plywood. Builders often use economy plywood for building shelves. … Pine Lumber. Solid pine lumber is one of the best of all the building materials for shelving. … Partcleboard. … MDL.

What kind of plywood do you use for shelves?

Stainable and paintable plywood are often used to make shelving, cabinets and furniture.

How much weight will 3/4 plywood support?

50 lbs.Other widely used plywood types include 3/4 inch, which is one of the most widely used of all plywood thicknesses. A 12-by-36-inch piece of 3/4-inch fir plywood can support up to 50 lbs. without problems.

How far can a shelf span without support?

The span limit is defined as the maximum distance apart that you can place the shelving supports. Glass, particleboard, solid lumber, plywood, and other common shelving materials can have span limits that can range from 18 inches to almost 5 feet.

What is the cheapest type of plywood?

D-grade plywood: The cheapest type of plywood veneers, these sheets typically haven’t been repaired. The flaws can be slightly larger and the knots in this type of plywood can be up to 2.5 inches in diameter. CDX: CDX-grade plywood is typically inexpensive material, as it is made of the two lowest grades (C and D).

Can I make shelves out of plywood?

Cut the plywood in the direction of the grain. Plywood shelving always mounts with the grain pattern running from side to side. … The thicker the plywood, the sturdier it will be. Shelving made from 3/4-inch plywood will be a sturdier base for heavy items than 1/2-inch thick plywood.

How thick should Wood be for shelves?

Use 3/4-inch thick materials for shelves and bookcase structure. If you’re using hardwood solids, it’s OK to boost the thickness to 1 1/4 inch for almost unlimited support. This type of shelf looks more like a mantel and is expensive, but adds the opulent look of craftsmanship.

Can I use MDF for shelves?

MDF is commonly used for shelving in closets and cabinets because it’s inexpensive and smooth. But MDF isn’t as stiff as plywood and will sag over time.